See Part II of our patio table post!
We’ve come so far on our back patio this summer, but it was still missing one of the most important things – a table! From the very beginning, when we thought about how we want our backyard to function, we get all smiley imagining our friends gathered around a large table late into the evening. No one cares about the time, and the fireplace is roaring. (The fireplace update is coming soon!) Actually, every aspect of our backyard has always been about the cozy joys of our neighborhood gatherings – from the wide, stadium-seating staircase to the built-in bench to our table-to-be. The flow from our kitchen to the yard has been a dream (as proven by a handful of successful barbecues!), and every single time our home has been the hub for a summer hangout, I get all misty thinking about how far this space has come! It hasn’t been quick, but it’s been worth every minute of our weekends spent whipping it into shape.
When the time came to finally build our table, we had to be mindful about the size of our yard versus the wish for a big, grand 12-seater. Sadly, that wasn’t going to happen, but we did lay out wood scraps to determine that an 8′ table would comfortably seat 8, and we’d still have plenty of space by the fireplace to add deeper lounge seats down the road (I see you, Chunk!):
During the pinning phase of our backyard project, I stumbled upon these Design Confidential plans for a DIY version of a much (much!) fancier Restoration Hardware table. I showed Scott, and he immediately agreed that it was The One. The lumber and supplies list was surprisingly short, and after gathering all of our materials, we walked out of the hardware store for $100. After a lot of thought, we decided to use regular 2 x lumber, and we’ll be sealing/painting the table with exterior-grade paint. Note: Although we debated using pressure treated lumber, ‘green’ lumber is more susceptible to warping/twisting over time. Okay for planter boxes, but not for furniture! By using high quality exterior paint and covering the table in the winter months, we should be good to go.
We followed the plans almost to a T (with just one exception – more in a minute), so if you love the look, too, you can find them right here! We did subtract 2′ from all of the lengths, as the plans are for a 10′ table, and we went with an 8′ table. Despite the table’s hefty size and weight, it was relatively simple to make, and we did so over the course of two afternoons. Even still, it was definitely a two person job, especially when it came to fasten the center braces and table trusses.
While Scott worked on the cut list, I sanded any raw edges and burrs (I used this kit, and it has been a sandpaper game changer), and I Kreg jigged the tabletop support pieces. We’ve been using this mini Kreg kit for years, and it’s the perfect price and size for any of our DIY projects that have called for it.
Essentially, the table is made by first building the two ends, adding the center brace and trusses, and finally, attaching the longer tabletop boards. If you’ve ever been intimidated by building your own table, this one looks much more complicated that it actually is. (In other words, trick all your friends into thinking you’re a master carpenter!)
Now, here’s the only part that we changed: Because we’ll be using this table for outdoor use, we needed to leave a 1/4″ – 1/2″ space between the top boards for water drainage. There are 4 boards on the top, but underneath those boards are 5 support pieces, as seen below. The center support wouldn’t allow for water to run through, so we ran our circular saw down the middle of this piece:
It’s a small pass through, but it should still allow water to run off, which will prevent the wood from rotting or disintegrating in a rainstorm.
As another rainy day preventative measure, we added rubber feet to the bottom of each of the legs. At 1/4″ thick, they’re essentially elevating the table from ever touching wet ground:
And here’s how it all came together! You’ll notice two clothing changes for the two afternoons we worked on the table (also, who can spot the Jack?):
The tabletop is made up of four 2″ x 10″ boards, and just as we’ve done with every lumber project in the yard so far, we ripped 1/8″ off each side to give them squared edges. Because wood is rarely – if ever – perfectly square (there’s usually a slight twist or small warp), we used small shims underneath some of the boards so that they would align nicely.
The original plans suggest a triangle pattern when attaching the lag bolts, and I’m here to tell you, don’t ignore this advice! Originally, we thought we could get away by using two lag bolts on each end of every 4 x 4, but that third bolt really made this table solid. The plans don’t specify which size bolt to use, but we used 1/4″ lag bolts with great success. A pack of 25 bolts + washers should do it!
The hardest part is yet to come; what color do we paint it? We couldn’t be more torn, and we’ve discussed everything from bright white (too blinding?) to steel grey (too hot?) to pretty shades of sage-y green, mint or sky blue. If we went with white, we could add, say, red chairs, or if we went with mint, we would stick with white.
It’s a toughie, but I think we’re narrowing in on a few winners. Painting will happen this coming weekend!
Update: Part II of our patio table post can be seen right here!